|
SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED
|
Auto Parts Plastic Injection Moulding Parts / Hot Runner Sub Gate
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Auto Parts Plastic Injection Moulding Parts / Hot Runner Sub Gate
<span style="fo
Auto Parts Plastic Injection Moulding Parts / Hot Runner Sub Gate
Quick Detail:
1. The part name: Automobile Parts (plastic injection mold)
2. Plastic material: PP
3. Cavity material: H13 HRC48-52
4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
5. Gate type: Hot runner to SUB gate according to our customers requires.
6. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers' requirements
7. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
Description:
The part name: Automobile Parts
Mold type: plastic injection mold
Part Material: PP
Locating ring Dimension: 3.99",
KO Pattern: 7”x7”,
Sprue Radius: SR 1/2"
Ejection type: ejection pin.
Mold construction description: Hot runner system, 2 plates, 2 sliders, there are 2 sliders in other sliders, there are some ejection pins in these sliders.
This part has very high appearance requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE B-2.
This mould is made in Shiny Mould Factory. It is a mould exported to USA, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.
Specifications:
|
1.name |
Automobile Parts (plastic injection mold) |
|
2.Plastic material |
PP |
|
3.mould base material |
S50C |
|
4.cavity material |
H13 HRC48-52, 136H, 420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc |
|
5.mold life |
1000k shots or according to customers quantity condition to decide it with saving cost for our customers. |
|
6.cavity number |
2 |
|
7.runner |
Hot runner |
|
8.gate type |
Hot runner to SUB gate according to our customers requires. |
|
9.mould weight |
250 kg |
|
10. mould base standard |
LKM Local standard, DME or HASCO,Customize according to customers' requirements |
|
11.cycle time |
27second |
|
12. standard of mold accessories |
LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires. |
|
13.design software |
Auto CAD ,UG, Pro-E ,Solid Works,moldflow,etc. |
|
SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED [China (Mainland)]
Business Type:Manufacturer |
