Post Offer Free
SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED  

Gold Index: 13224

You are here: home  > Medical Injection Molding  > LKM Medical Injection Molding , Scoop Double Injection Mold
Enlarge LKM Medical Injection Molding , Scoop Double Injection Mold

LKM Medical Injection Molding , Scoop Double Injection Mold 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: SY-10056


LKM Medical Injection Molding , Scoop Double Injection Mold
 
<span style="font-fam

LKM Medical Injection Molding , Scoop Double Injection Mold

 

Quick Detail:

 

1. The part name: scoop   (double color injection mold)

2. Plastic material: PP+PP

3. Cavity material: S136 HRC48-52

4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.

5. Gate type: Hot runner to edge gate according to our customers requires.

6. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers' requirements

7. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.

 

 

Description:

 

The part name: scoop  

Mold type: double color injection mold

Part Material: PP+PP

Locating ring Dimension: 3.99",

KO Pattern: 7”x7”,

Sprue Radius: SR 1/2"

Ejection type: ejection pin

Mold construction description: Hot runner system, 2 plates, and double color injection mold

 

This part has very high appearance requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE A-2.

 

This mould is made in Shiny Mould Factory. It is a mould exported to USA, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.

 

Compared with traditional method of molding, advantages of two shot injection molding process are as follows:

1. The core material can use low viscosity materials to reduce injection pressure.

2. From the consideration of environmental protection, the core materials can use recycled materials.

3. According to the different use of characteristics, such as thick wall finished product cortex use soft material, the core material can use hard material or foamed plastic to reduce weight.

4. Low quality of core materials is helpful to reduce costs.

5. The cortex material or core material can use expensive material with special surface properties, such as material of EMI Shielding or high conductivity to increase product performance.

 

 

Specifications:

 

1.name

scoop   (double color injection mold)

2.Plastic material

PP+PP

3.mould base material

S50C

4.cavity material

S136 HRC48-52, H13, 420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc

5.mold life

1000k shots or according to customers quantity condition to decide it with saving cost for our customers.

6.cavity number

4+4

7.runner

Hot runner

8.gate type

Hot runner to edge gate according to our customers requires.

9.mould weight

300 kg

10. mould base standard

LKM Local standard, DME or HASCO,Customize according to customers' requirements

11.cycle time

bigPhoto
 Mr. Jim Lee

Tel: 86-769-85355698
Contact to this supplier

Related Search

Double Injection Molding    Double Injection Mold    Injection Molding    Injection Mold    Double Injection    Injection Molding Machine    More>>

Find more related products in following catalogs on Hisupplier.com

Machinery & Industrial Supplies >> General Parts >> Gaskets & Seals

Company Info

SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED [China (Mainland)]


Business Type:Manufacturer
City: Dongguan
Province/State: Guangdong
Country/Region: China (Mainland)

View Contact Details

You May Like:

Product (253)