Post Offer Free
SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED  

Gold Index: 13224

You are here: home  > Pipe Fitting Mould  > Pipe Fitting Plastic Injection Mould , Sub Gate Cold Runner
Enlarge Pipe Fitting Plastic Injection Mould , Sub Gate Cold Runner

Pipe Fitting Plastic Injection Mould , Sub Gate Cold Runner 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: SY-13111


Pipe Fitting Plastic Injection Mould , Sub Gate Cold Runner
 
<span style="font-fam

Pipe Fitting Plastic Injection Mould , Sub Gate Cold Runner

 

Quick Detail:

 

1. The part name: pipe fitting (plastic injection mold)

2. Plastic material: PP

3. Cavity material: H13 HRC48-52

4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.

5. Gate type: Sub-gate, direct gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires.

6. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers' requirements

7. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.

 

 

Description:

 

The part name: pipe fitting

Mold type: Plastic Injection Mould

Part Material: PP

Locating ring Dimension: 100

KO Pattern: 200*200

Sprue Radius: SR 19

Ejection type: ejection pins, Sleeves

Gates/Runners: sub gate cold Runner

Mold construction description: cold runner system with sub gate, slider, lifter, 2 plates, and a lot of shut off area.

 

 

This product is made of PP plastic material and it is one of the components of the reputable brand pipe fitting. The construction is complicated and there are hydraulic cylinder, hydraulic motors, gear, fan gear, gear-rack in the mold, also have Internal and external thread in the product, so it has a very high technical requirement for the mould design. The mould is a cold runner mould with water cooling system and the part can be molded by both automatically and manually. Also have an Automatic thread demoulding device in the mold.

 

This part has very high appearance and size requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE-B1.

 

This mould is made in Shiny Mould Factory. It is a mould exported to Europe, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.

 

 

Specifications:

 

1.name

pipe fitting (plastic injection mold)

Plastic material

PP,PE,PA,PC,ABS,PC+ABS,POM,PVC,PMMA,PS,PPO,ASA,TPU,TPR,EVA,PP+GF,PC+GF,

POM+GF,PA+GF,PPT,PET,PETG,SEBS etc.

3.mould base material

S50C,P20,S136 etc

4.cavity material

H13 HRC48-52,S136,420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc

5.mold life

1000k shots or according to customers quantity condition to decide it with saving cost for our customers.

6.cavity number

2

7.runner

cold

8.gate type

Sub-gate, direct gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires.

9.mould weight

400 kg

10. mould base standard

LKM Local standard, DME,HASCO,Customize according to customers' requirements

11.cycle time

 28 second
bigPhoto
 Mr. Jim Lee

Tel: 86-769-85355698
Contact to this supplier

Related Search

Plastic Pipe Fitting Mould    Runner Mould    Pipe Fitting Mould    PVC Pipe Fitting Mould    Plastic Injection Mould    Injection Plastic Mould    More>>

Find more related products in following catalogs on Hisupplier.com

Machinery & Industrial Supplies >> Boilers & Power Equipment >> Other Power Equipment

Company Info

SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED [China (Mainland)]


Business Type:Manufacturer
City: Dongguan
Province/State: Guangdong
Country/Region: China (Mainland)

View Contact Details

You May Like:

Product (253)