|
SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED
|
TPR EVA PP Transparent Mold
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
TPR EVA PP Transparent Plastic Injection Mold Fan Gate For Parts
<span style="fon
TPR EVA PP Transparent Plastic Injection Mold Fan Gate For Parts
Quick Detail:
1. The part name: Transparent parts plastic injection mold
2. Plastic material: PC
3. Cavity material: H13 HRC48-52
4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
5. Gate type: FAN-gate, direct gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires.
6. Mold base standard: LKM Local standard, DME or HASCO, Customize according to customers' requirements.
7. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
Description:
The part name: Transparent parts
Mold type: Plastic Injection Mould with cold runner system
Part Material: PC
Locating ring Dimension: 100
KO Pattern: 200*200
Sprue Radius: SR 19
Ejection type: ejection pins.
Mold construction description: cold runner system with FAN gate, 2 plates, high mirror
polishing part surface.
This part has very high appearance and size requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport, Sliver Marks, Gas Trap Effect, Visible Ejector Marks,Deformation,Short shot Filling, Burnt Streaks, Sink Marks,Flash,Over dimension, Under dimension, Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE A-3.
This mould is made in Shiny Mould Factory. It is a mould exported to Europe, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge. Few of Injection Molding company can make nice transparent/clear plastic parts in china. Since for these plastic products usually use for optical and plastic packaging, the material should be of high transparency, good impact and abrasion resistance, SHINY MOLD is professional company for transparent/clear plastic part molding in China. Up to 10 years’ experience in the plastic injection mold industry, we develop our technology for different transparent plastic part molding solutions.
Specifications:
|
1.name |
Transparent parts(plastic injection mold) |
|
2.Plastic material |
PC,PE,PA,PC,ABS,POM,PVC,PMMA,PS,PPO,ASA,TPU,TPR,EVA,PP+GF,PC+GF,POM+GF, PA+GF,PPT,PET,PETG,SEBS etc. |
|
3.mould base material |
S50C,P20,S136 etc |
|
4.cavity material |
H13HRC48-52,S136,420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc |
|
5.mold life |
1000k shots or according to customers quantity condition to decide it with saving cost for our customers. |
|
6.cavity number |
2 |
|
7.runner |
cold runner |
|
8.gate type |
FAN-gate, direct gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires. |
|
9.mould weight |
360 kg |
|
10. mould base standard |
LKM Local standard, DME,HASCO,Customize according to customers' requirements |
|
11.cycle time |
28 second |
|
12. stand
SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED [China (Mainland)]
Business Type:Manufacturer |
