|
SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED
|
2 Plates Auto Parts Mould With Cold Runner System Single Cavity
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
2 Plates Auto Parts Mould With Cold Runner System Single Cavity
<span style="font
2 Plates Auto Parts Mould With Cold Runner System Single Cavity
Quick Detail:
1. The part name: Auto Parts (plastic injection mold)
2. Plastic material: PC+ABS
3. Cavity material: H13 HRC48-52
4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
5. Gate type: Point gate, Banana gate, Edge gate, Sub-gate, Direct gate, fan gate, valve gate, tip gate etc according to our customers requires.
6. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers' requirements
7. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
Description:
The part name: Auto Parts
Mold type: Plastic Injection Mould with cold runner system
Part Material: PC+ABS
Locating ring Dimension: 3.99",
KO Pattern: 7”x7”,
Sprue Radius: SR 1/2"
Gates/Runners: point gate
Ejection type: Pins, Sleeves
Mold construction description: cold runner system, sliders, lifters many inserts, 2 plates. many shut off area.
This product is made of ABS+PC plastic material and it is one of the components of the reputable brand Auto. The mold construction is complicated and there are many inserts, sliders, lifters and ejection pins, so it has a very high technical requirement for the mould design. The mould is a point gate mould with the best water cooling system and the part can be molded by automatically.
This part has very high appearance requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE B-2.
This mould is made in Shiny Mould Factory. It is a mould exported to USA, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.
Specifications:
|
1.name |
Auto Parts (plastic injection mold) |
|
2.Plastic material |
PC+ABS,PP,PE,PA,PC,ABS,POM,PVC,PMMA,PS,PPO,ASA,TPU,TPR,EVA,PP+GF,PC+GF, POM+GF,PA+GF,PPT,PET,PETG,SEBS etc. |
|
3.mould base material |
S50C,P20,S136 etc |
|
4.cavity material |
H13 HRC48-52, S136, 420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc |
|
5.mold life |
1000k shots or according to customers quantity condition to decide it with saving cost for our customers. |
|
6.cavity number |
1 |
|
7.runner |
Cold runner |
|
8.gate type |
Point gate, Banana gate, Edge gate, Sub-gate, Direct gate, fan gate, valve gate, tip gate etc according to our customers requires. |
|
9.mould weight |
320kg |
|
10. mould base standard |
LKM Local standard, DME or HASCO,Customize according to customers' requirements |
|
11.cycle time |
32 second |
|
SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED [China (Mainland)]
Business Type:Manufacturer |
