Post Offer Free
SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED  

Gold Index: 13224

You are here: home  > Auto Parts Mould  > ODM Single Cavity Automotive Mould Parts With ABS POM PVC PMMA
Enlarge ODM Single Cavity Automotive Mould Parts With ABS POM PVC PMMA

ODM Single Cavity Automotive Mould Parts With ABS POM PVC PMMA 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: SY-13167


ODM Single Cavity Automotive Mould Parts With ABS POM PVC PMMA
 
<span style="font-

ODM Single Cavity Automotive Mould Parts With ABS POM PVC PMMA

 

Quick Detail:

 

1. The part name: Auto Parts (plastic injection mold)

2. Plastic material: PP

3. Cavity material: H13 HRC48-52

4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.

5. Gate type: Point gate, Banana gate, Edge gate, Sub-gate, Direct gate, fan gate, valve gate, tip gate etc according to our customers requires.

6. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers' requirements

7. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.

 

 

Description:

 

The part name: Auto Parts

Mold type: Plastic Injection Mould with cold runner system

Part Material: PP

Locating ring Dimension: 3.99",

KO Pattern: 7”x7”,

Sprue Radius: SR 1/2"

Gates/Runners: point gate

Ejection type: Pins, Sleeves

Mold construction description: cold runner system, sliders, many inserts, 2 plates.

 

This product is made of PP plastic material and it is one of the components of the reputable brand Auto. The mold construction is complicated and there are many inserts, sliders, lifters and ejection pins, so it has a very high technical requirement for the mould design. The mould is a point gate mould with the best water cooling system and the part can be molded by automatically.

 

This part has higher appearance requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE B-2.

 

This mould is made in Shiny Mould Factory. It is a mould exported to USA, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.

 

 

Specifications:

 

1.name

Auto Parts (plastic injection mold)

2.Plastic material

PP,PC+ABS,PP,PE,PA,PC,ABS,POM,PVC,PMMA,PS,PPO,ASA,TPU,TPR,EVA,PP+GF,PC+GF,

POM+GF,PA+GF,PPT,PET,PETG,SEBS etc.

3.mould base material

S50C,P20,S136 etc

4.cavity material

H13 HRC48-52, S136, 420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc

5.mold life

1000k shots or according to customers quantity condition to decide it with saving cost for our customers.

6.cavity number

1

7.runner

Cold runner

8.gate type

Point gate, Banana gate, Edge gate, Sub-gate, Direct gate, fan gate, valve gate, tip gate etc according to our customers requires.

9.mould weight

520kg

10. mould base standard

LKM Local standard, DME or HASCO,Customize according to customers' requirements

11.cycle time

40 second

12. standard of mold accessories

bigPhoto
 Mr. Jim Lee

Tel: 86-769-85355698
Contact to this supplier

Related Search

Cavity Mould    Multi Cavity Mould    Pvc Abs    Automotive Mould    Pom    Automotive Spare Parts    More>>

Find more related products in following catalogs on Hisupplier.com

Machinery & Industrial Supplies >> Industrial Supplies Projects

Company Info

SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED [China (Mainland)]


Business Type:Manufacturer
City: Dongguan
Province/State: Guangdong
Country/Region: China (Mainland)

View Contact Details

You May Like:

Product (253)