|
SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED
|
ABS Household Molds Electrical Appliances / Plastic Injection
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
ABS Household Molds Electrical Appliances / Plastic Injection
<span style="font-f
ABS Household Molds Electrical Appliances / Plastic Injection
Quick Detail:
1. The part name: Small household electrical appliances(plastic injection mold)
2. Plastic material: ABS+PC
3. Cavity material: H13 HRC48-52
4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
5. Gate type: Sub-gate, direct gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires.
6. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers' requirements
7. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
Description:
The part name: Small household electrical appliances
Mold type: Plastic Injection Mould with hot runner system
Part Material: ABS+PC
Locating ring Dimension: 100
KO Pattern: 200*200
Sprue Radius: SR 19
Ejection type: ejection pins, ejection sleeves.
Mold construction description: hot runner system, 2 plates, and many shut off area.
This product is made of ABS+PC plastic material and it is one of the components of the reputable brand Small household electrical appliances. There are some lifters, inserts and shut off area, so it has a very high technical requirement for the mould design. The mould use the hot runner to sub gate, at the same time, the mould is with the best water cooling system and the part can be molded by automatically.
This part has higher appearance and size requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE-B2.
This mould is made in Shiny Mould Factory. It is a mould exported to Europe, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.
Because using Hot Runner system, the mold will have the key advantages showed below:
1. Elimination of the Runner
2. Cycle Time Reduction/Lower Processing Costs
3. Improved Molding System Efficiency
4. Optimal Part Quality
5. Molding Automation
6. Design Flexibility, where flexibility in gate location can help optimize cavity orientation, cooling and mold simplification.
7. Balanced Melt Flow
Specifications:
|
1.name |
Small household electrical appliances(plastic injection mold) |
|
Plastic material |
ABS+PC,GPPS,PP,PE,PA,PC,PC+ABS,POM,PVC,PMMA,PS,PPO,ASA,TPU,TPR,EVA,PP+GF, PC+GF,POM+GF,PA+GF,PPT,PET,PETG,SEBS etc. |
|
3.mould base material |
S50C,P20,S136 etc |
|
4.cavity material |
H13 HRC48-52,S136,420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc |
|
5.mold life |
1000k shots or according to customers quantity condition to decide it with saving cost for our customers. |
|
6.cavity number |
2 |
|
7.runner |
Hot runner to sub gate |
|
8.gate type |
Sub-gate, Point gate, direct gate, fan gate, edge gate, valve gate, tip gate etc according to our customers requires. |
|
SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED [China (Mainland)]
Business Type:Manufacturer |
