|
SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED
|
POM , PVC , PMMA Household Molds Household Electrical Appliances
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
POM , PVC , PMMA Household Molds Household Electrical Appliances
<span style="fon
POM , PVC , PMMA Household Molds Household Electrical Appliances
Quick Detail:
1. The part name: household electrical appliances(plastic injection mold)
2. Plastic material: ABS
3. Cavity material: H13 HRC48-52
4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
5. Gate type: Point gate, Sub-gate, direct gate, fan gate, edge gate, valve gate, tip gate etc according to our customers requires.
6. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers' requirements
7. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
Description:
The part name: household electrical appliances
Mold type: Plastic Injection Mould
Part Material: ABS
Specifications:
Locating ring Dimension: 100
KO Pattern: 200*200
Sprue Radius: SR 19
Gates/Runners: point gate cold Runner
Ejection type: ejection pins, ejection sleeves.
Mold construction description: cold runner system with banana gate, 2 plates, and many inserts and lifters, many shut off area.
This product is made of ABS plastic material and it is one of the components of the reputable brand of household electrical appliances. The mold construction is complicated and there are many inserts, lifters and shut off area, so it has a very high technical requirement for the mould design. The mould is a cold runner mould with the best water cooling system and the part can be molded by automatically.
This part has very high appearance and size requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE-A2.
This mould is made in Shiny Mould Factory. It is a mould exported to Europe, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.
Specifications:
|
1.name |
household electrical appliances(plastic injection mold) |
|
2.Plastic material |
ABS,GPPS,PP,PE,PA,PC,PC+ABS,POM,PVC,PMMA,PS,PPO,ASA,TPU,TPR,EVA,PP+GF,PC+GF, POM+GF,PA+GF,PPT,PET,PETG,SEBS etc. |
|
3.mould base material |
S50C,P20,S136 etc |
|
4.cavity material |
H13 HRC48-52,S136,420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc |
|
5.mold life |
1000k shots or according to customers quantity condition to decide it with saving cost for our customers. |
|
6.cavity number |
1 |
|
7.runner |
Cold runner |
|
8.gate type |
Point gate, Sub-gate, direct gate, fan gate, edge gate, valve gate, tip gate etc according to our customers requires. |
|
9.mould weight |
300 kg |
|
10. mould base standard |
LKM Local standard, DME,HASCO,Customize according to customers' requirements |
|
11.cycle time |
26 second |
