|
SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED
|
Middle Frame Of Customized Cell Phone Cases LKM Base Mold
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Middle Frame Of Customized Cell Phone Cases LKM Base Mold
<span style="font-fam
Middle Frame Of Customized Cell Phone Cases LKM Base Mold
Quick Detail:
1. The part name: middle frame of mobile phone (plastic injection mold)
2. Plastic material: PP
3. Cavity material: S136 HRC48-52
4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
5. Gate type: Direct gate, sub-gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires.
6. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers' requirements
7. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
Description:
The part name: middle frame of mobile phone
Mold type: Plastic Injection Mould with hot runner system
Part Material: PC+ABS
Locating ring Dimension: 3.99",
KO Pattern: 7”x7”,
Sprue Radius: SR 1/2"
Ejection type: ejection pin
This part has very high appearance requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE A-3.
This mould is made in Shiny Mould Factory. It is a mould exported to USA, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.
the product wall thickness is only 0.8mm, the width size is no more than 1mm, so the plastic flow is very bad and the part strength is very weak, which is the key difficulty.
Because using Hot Runner system, the mold will have the key advantages showed below:
1. Elimination of the Runner
2. Cycle Time Reduction/Lower Processing Costs
3. Improved Molding System Efficiency
4. Optimal Part Quality
5. Molding Automation
6. Design Flexibility, where flexibility in gate location can help optimize cavity orientation, cooling and mold simplification.
7. Balanced Melt Flow
Specifications:
|
1.name |
middle frame of mobile phone (plastic injection mold) |
|
Plastic material |
PP,PE,PA,PC,ABS,PC+ABS,POM,PVC,PMMA,PS,PPO,ASA,TPU,TPR,EVA,PP+GF,PC+GF, POM+GF,PA+GF,PPT,PET,PETG,SEBS etc. |
|
3.mould base material |
S50C,P20,S136 etc |
|
4.cavity material |
S136 HRC48-52, H13, 420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc |
|
5.mold life |
1000k shots or according to customers quantity condition to decide it with saving cost for our customers. |
|
6.cavity number |
4 |
|
7.runner |
Hot runner |
|
8.gate type |
Direct gate, sub-gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires. |
|
9.mould weight |
150kg |
|
10. mould base standard |
<
