|
SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED
|
PC Blue Custom Cell Phone Cases For Back Cover / Cold Runner
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
PC Blue Custom Cell Phone Cases For Back Cover / Cold Runner
<span style="font-fa
PC Blue Custom Cell Phone Cases For Back Cover / Cold Runner
Quick Detail:
1. The part name: Mobile phone back cover plastic injection mold
2. Plastic material: PC
3. Cavity material: S136 HRC48-52
4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
5. Gate type: Point gate, Direct gate, sub-gate, fan gate, edge gate, valve gate, tip gate etc according to our customers requires.
6. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers' requirements
7. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
Description:
The part name: Mobile phone back cover
Mold type: Plastic Injection Mould
Part Material: PC
Locating ring Dimension: 3.99",
KO Pattern: 7”x7”,
Sprue Radius: SR 1/2"
Gates/Runners: Cold Runner
Ejection type: Pins
Mold construction description: point gate system, slider, lifter, 3plate
This part has very high appearance requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE A-2.
This mould is made in Shiny Mould Factory. It is a mould exported to USA, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.
This product is made of PC plastic material and it is one of the components of the reputable brand printer. The construction is complicated, so it has a very high technical requirement for the mould design. The mould is a 3 plate’s mould with water cooling system and the part can be molded by both automatically and manually.
Specifications:
|
1.name |
Mobile phone back cover plastic injection mold |
|
Plastic material |
PC,PP,PE,PA,ABS,PC+ABS,POM,PVC,PMMA,PS,PPO,ASA,TPU,TPR,EVA,PP+GF,PC+GF, POM+GF,PA+GF,PPT,PET,PETG,SEBS etc. |
|
3.mould base material |
S50C,P20,S136 etc |
|
4.cavity material |
S136 HRC48-52, H13, 420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc |
|
5.mold life |
1000k shots or according to customers quantity condition to decide it with saving cost for our customers. |
|
6.cavity number |
2 |
|
7.runner |
cold |
|
8.gate type |
Point gate, Direct gate, sub-gate, fan gate, edge gate, valve gate, tip gate etc according to our customers requires. |
|
9.mould weight |
230 |
|
10. mould base standard |
LKM Local standard, DME or HASCO,Customize according to customers' requirements |
|
11.cycle time |
19second |
|
12. standard of mold accessories |
SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED [China (Mainland)]
Business Type:Manufacturer |
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
.jpg)
