|
SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED
|
Single Cavity Custom Plastic Injection Tooling For Automobile Parts
| Place of Origin: | Guangdong, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Single Cavity Custom Plastic Injection Tooling For Automobile Parts
<span style="
Single Cavity Custom Plastic Injection Tooling For Automobile Parts
Quick Detail:
1. The part name: Automobile Parts (plastic injection mold)
Plastic material: PU (elastic plastic)
2. Cavity material: H13 HRC48-52
3. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
4. Gate type: banana gate according to our customers requires.
5. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers' requirements
6. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
Description:
The part name: Automobile Parts
Mold type: plastic injection mold
Part Material: PU(elastic plastic)
Locating ring Dimension: 3.99",
KO Pattern: 7”x7”,
Sprue Radius: SR 1/2"
Ejection type: ejection pin.
Mold construction description: cold runner system with banana gate, 2 plates, core insert need to be Pop-up at the same moment with mold open, then, the product will be eject out cavity with forced demolding, when mold close, the center large core insert will be press back to original location by the cavity.
This part has very high appearance requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE B-2.
This mould is made in Shiny Mould Factory. It is a mould exported to USA, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.
Specifications:
|
1.name |
Automobile Parts (plastic injection mold) |
|
2.Plastic material |
PU |
|
3.mould base material |
S50C |
|
4.cavity material |
PU,H13 HRC48-52, 136H, 420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc |
|
5.mold life |
1000k shots or according to customers quantity condition to decide it with saving cost for our customers. |
|
6.cavity number |
1 |
|
7.runner |
cold runner |
|
8.gate type |
Banana gate according to our customers requires. |
|
9.mould weight |
320 kg |
|
10. mould base standard |
LKM Local standard, DME or HASCO,Customize according to customers' requirements |
|
11.cycle time |
38second |
|
12. standard of mold accessories |
LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires. |
|
13.design software |
SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED [China (Mainland)]
Business Type:Manufacturer |
