Post Offer Free
SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED  

Gold Index: 13224

You are here: home  > Plastic Injection Tooling  > Bottle Cap Plastic Injection Tooling / PPT PET Cold Runner System
Enlarge Bottle Cap Plastic Injection Tooling / PPT PET Cold Runner System

Bottle Cap Plastic Injection Tooling / PPT PET Cold Runner System 

Place of Origin: Zhejiang, China (Mainland) 
inquire
Add to My Favorites
HiSupplier Escrow
Share |

Product Detail

Model No.: SY-13078

Bottle Cap Plastic Injection Tooling / PPT PET Cold Runner System
 
<span style="fo

Bottle Cap Plastic Injection Tooling / PPT PET Cold Runner System

 

Quick Detail:

 

1. The part name: bottle cap (plastic injection mold)

2. Plastic material: PP

3. Cavity material: H13 HRC48-52

4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.

5. Gate type: Sub-gate, direct gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires.

6. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers' requirements

7. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.

 

 

Description:

 

The part name: bottle cap

Mold type: Plastic Injection Mould with cold runner system

Part Material: PP

Locating ring Dimension: 100

KO Pattern: 200*200

Sprue Radius: SR 19

Ejection type: ejection while rotating

Mold construction description: cold runner system with sub gate, 2 plates and automatic thread demoulding device.

 

 

This product is made of PP plastic material and it is one of the components of the reputable brand bottle. The construction is complicated and there are hydraulic cylinder, hydraulic motors, gear, gear-rack in the mold, also have Internal thread in the product, so it has a very high technical requirement for the mould design. The mould is a cold runner mould with water cooling system and the part can be molded by automatically. Also have an Automatic thread demoulding device in the mold.

 

This part has very high appearance and size requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE-B1.

 

This mould is made in Shiny Mould Factory. It is a mould exported to Europe, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.

 

 

Specifications:

 

1.name

bottle cap (plastic injection mold)

Plastic material

PP,PE,PA,PC,ABS,PC+ABS,POM,PVC,PMMA,PS,PPO,ASA,TPU,TPR,EVA,PP+GF,PC+GF,

POM+GF,PA+GF,PPT,PET,PETG,SEBS etc.

3.mould base material

S50C,P20,S136 etc

4.cavity material

H13 HRC48-52,S136,420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc

5.mold life

1000k shots or according to customers quantity condition to decide it with saving cost for our customers.

6.cavity number

4

7.runner

cold

8.gate type

Sub-gate, direct gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires.

9.mould weight

290 kg

10. mould base standard

LKM Local standard, DME,HASCO,Customize according to customers' requirements

11.cycle time

 28 second

12. standard of mold accessories
bigPhoto
 Mr. Jim Lee

Tel: 86-769-85355698
Contact to this supplier

Related Search

Injection Bottle Cap Mould    Injection Tooling    Plastic Bottle Cap    Plastic Bottle Screw Cap    Plastic Pet Bottle    PET Plastic Bottle    More>>

Find more related products in following catalogs on Hisupplier.com

Machinery & Industrial Supplies >> Industrial Batteries

Company Info

SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED [China (Mainland)]


Business Type:Manufacturer
City: Dongguan
Province/State: Guangdong
Country/Region: China (Mainland)

View Contact Details

You May Like:

Product (253)