|
SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED
|
Elastic Custom Plastic Injection Molds Tooling / LKM DME HASCO
| Place of Origin: | Zhejiang, China (Mainland) |
|
|
| Add to My Favorites | |
| HiSupplier Escrow |
Product Detail
Elastic Custom Plastic Injection Molds Tooling / LKM DME HASCO
<span style="font-
Elastic Custom Plastic Injection Molds Tooling / LKM DME HASCO
Quick Detail:
1. The part name: Elastic plastic (plastic injection mold)
2. Plastic material: EPDM (elastic plastic)
3. Cavity material: H13 HRC48-52
4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
5. Gate type: POINT gate according to our customers requires.
6. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers' requirements
7. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.
Description:
The part name: Elastic plastic
Mold type: plastic injection mold
Part Material: EPDM(elastic plastic)
Locating ring Dimension: 3.99",
KO Pattern: 7”x7”,
Sprue Radius: SR 1/2"
Ejection type: stripper plate.
Mold construction description: cold runner system with POINT gate, 3 plates, 2 sliders, and stripper plate. The wall thickness of the product is about 6mm, it is very easy to form the sink mark after molding.
This part has very high appearance requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires of texture MT11010.
This mould is made in Shiny Mould Factory. It is a mould exported to USA, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.
Specifications:
|
1.name |
Elastic plastic (plastic injection mold) |
|
2.Plastic material |
EPDM |
|
3.mould base material |
S50C |
|
4.cavity material |
H13 HRC48-52, 136H, 420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc |
|
5.mold life |
1000k shots or according to customers quantity condition to decide it with saving cost for our customers. |
|
6.cavity number |
2 |
|
7.runner |
cold runner |
|
8.gate type |
POINT gate according to our customers requires. |
|
9.mould weight |
280 kg |
|
10. mould base standard |
LKM Local standard, DME or HASCO,Customize according to customers' requirements |
|
11.cycle time |
28 second |
|
12. standard of mold accessories |
LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires. |
|
13.design software |
Auto CAD ,UG, Pro-E ,Solid Works,moldflow,etc. |
