Hot Runner GPPS Plastic Injection Tooling For Medical Apparatus

Quick Detail:

1. The part name: Accessories of medical apparatus(plastic injection mold)

2. Plastic material: GPPS

3. Cavity material: H13 HRC48-52

4. Mold life: 1000k shots or according to customers quantity condition to decide it with saving cost for our customers.

5. Gate type: Sub-gate, direct gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires.

6. Mold base standard: LKM Local standard, DME or HASCO,Customize according to customers' requirements

7. Standard of mold accessories: LKM, DME, HASCO, MISUMI, Meusburger, CUMSA, Progressive, INCORE, HRS, Husky, YUDO, PETS, MOLD-MASTER, MERKLE, Parker, HPS, LKM, EUCHNER, RJG, cilpres, NITTO, CRACK, ASSAB, GSW DIN standard, BOHLER, AISI standard, DAIDO JIS standard, PUNCH etc according to our customers requires.

Description:

The part name: pipe fitting

Mold type: Plastic Injection Mould with hot runner system

Part Material: GPPS

Locating ring Dimension: 100

KO Pattern: 200*200

Sprue Radius: SR 19

Ejection type: ejection pins, stripper plate.

Mold construction description: cold runner system with sub gate, 8 plates, and Automatic thread demoulding device with 5 step gear transmission for 64 cavities.

This product is made of GPPS plastic material and it is one of the components of the reputable brand Medical instrument. The construction is complicated and there are hydraulic cylinder, hydraulic motors, gear, gear-rack in the mold, also have Internal thread in the product, so it has a very high technical requirement for the mould design. The mould is a hot runner mould with water cooling system and the part can be molded by automatically. Also have an Automatic thread demoulding device in the mold, at the same time, this mold is 64 cavities, so the Automatic thread demoulding device is 5 step gear transmission drive.

This part has very high appearance and size requirements, the defect showed below will not be acceptable, for example, weld line, Dark Sport,Sliver Marks,Gas Trap Effect,Visible Ejector Marks,Deformation,Short shot Filling,Burnt Streaks,Sink Marks,Flash,Over dimension,Under dimension,Stress Crack etc. Moreover, the product finishing surface must meet the requires more than SPI-SPE-B1.

This mould is made in Shiny Mould Factory. It is a mould exported to Europe, with complicated structures and high quality requests. Customer needs mold life to be over 1 million shots. We can ensure this mold life and give warrant to our customer that once some mould components are broken during working, if it is caused not by the operation fault from the workers, we can provide new mould components to them free of charge.

Specifications:

1.name	Accessories of medical apparatus(plastic injection mold)
Plastic material	GPPS,PP,PE,PA,PC,ABS,PC+ABS,POM,PVC,PMMA,PS,PPO,ASA,TPU,TPR,EVA,PP+GF, PC+GF,POM+GF,PA+GF,PPT,PET,PETG,SEBS etc.
3.mould base material	S50C,P20,S136 etc
4.cavity material	H13 HRC48-52,S136,420, P20, D2, 1040, 0-1, S-7, A2, 1.2344, 1.2083, 1.2311, 1.2739, 1.2343, 1.2510, 1.2767,NAK80,SKD61,718,738,DF-2 etc
5.mold life	1000k shots or according to customers quantity condition to decide it with saving cost for our customers.
6.cavity number	64
7.runner	Hot runner
8.gate type	Sub-gate, direct gate, fan gate, point gate, edge gate, valve gate, tip gate etc according to our customers requires.
9.mould weight	500 kg
10. mould base standard	LKM Local standard, DME,HASCO,Customize according to customers' requirements
11.cycle time	28 second  Mr. Jim Lee Tel: 86-769-85355698 Contact to this supplier Related Search Hot Runner    Injection Tooling    Medical Apparatus    Hot Runner Mold    Hot Runner Mould    Hot Runner System    More>> Find more related products in following catalogs on Hisupplier.com Machinery & Industrial Supplies >> Pneumatic Components Related Products XR4 Pressure Reducer XR4 gas regulator xw4 Air pressure regulators XFRL4 hydraulic pneumatic ZDFS HLC20~30 HL seiries Combination unit(F+R+L) HLC20~30 HLC20A~30A HL seiries Combination unit(FR+L) HLC20A~30A HLF20~30 HL Series Air Filter HLF20~30 HLR20~30 HL Series Air Regulator HLR20~30 × Company Info SHINY (HK) INDUSTRIAL TECHNOLOGY LIMITED [China (Mainland)] Business Type:Manufacturer City: Dongguan Province/State: Guangdong Country/Region: China (Mainland) View Contact Details You May Like: prev 4 Cavity Plastic Injection Tooling POM PP Plastic Injection Mold Cold Runner Plastic Injection Tooling PP PE Bottle Cap Plastic Injection Tooli... PP Bottle Cap Plastic Injection Mold Too... Single Cavity Custom Plastic Injection T... TPR Elastic Plastic Injection Tool With ... EPDM Plastic Injection Tooling / Elastic... TPR 2 Plates Plastic Injection Tooling /... TPR Cold Runner Plastic Injection Toolin... Elastic Custom Plastic Injection Molds T... Cold Runner System Plastic Injection Too... EPDM Custom Plastic Injection Tooling , ... Hot Runner GPPS Plastic Injection Toolin... Swim Goggles Plastic Injection Mold Tool... 30%GF PA Custom Plastic Injection Toolin... Bottle Cap Plastic Injection Tooling / P... Helical Gear Plastic Injection Tool , PO... next Product (253) Plastic Injection Tooling  (18) Customized Cell Phone Cases  (25) Transparent Mold  (15) Pipe Fitting Mould  (19) Household Molds  (25) Gas Assisted Injection  (7) Medical Injection Molding  (12) Auto Parts Mould  (32) Custom Injection Mold  (22) Double Injection Mould  (19) Injection Mould Parts  (15) Precision Injection Mould  (15) Cold Runner Mold  (17) Hot Runner Injection Mould  (5) Plastic Injection Mould  (7) Printable Page   Bookmark this page Sitemap   XML   About HiSupplier   Help Center    Customer Service   Friend Links   Site Map   Archives Browse by: China Suppliers - Hot Products - Products Directory - Offers Directory - Suppliers Directory - Buyers Directory Language Option: العربية - Nederlands- Français- Deutsch- Italiano- 日本語- 한국의- Português- Pусский- Español Copyright © HiSupplier.com Online Inc. All Rights Reserved.